ATP06-2S 2-WAY PLUG, FEMALE. COMPARABLE TO PN# DTP06-2SSPECIFICATIONS:Product Type: PlugNumber of positions: 2-WayContact Size: 12AWG: 10-14Amperage: 25AContact type: SocketColor: GreySeal Wire Range (mm): 3.40 – 4.95Mating Part(s): ATP04-2P* ReceptacleWedgelock Part Number: AWP-2S, AWP-2SA, AWP-2SB, AWP-2SC, AWP-2SDSeal Diameter: 3.40mm(.134″) – 4.95mm(.195″)Wire Range: 10-14 AWGHeavy-Duty, Multi-Pin, 25A Thermoplastic ConnectorsAvailable in 2, 4 and 6 PositionAmphenol Sine Systems ATP Series™ Connectors are designed as a high-performance, cost-effective, thermoplastic solution with superior environmental seals, seal retention capabilities and are designed for use with 10-14AWG with Size 12 contacts handling up to 25A. All of our ATP Series™ connectors have been developed to be completely compatible with all other existing standard products industry-wide. Available in BoardLock™, HYPERBUSS™, PanelMate™ and StructurePlus™ options.Applications: Marine, Heavy Equipment, Agricultural, Automotive, Alternative Energy and other demanding interconnect applicationsTechnical SpecificationsOperating Temperature: -55°C to 125°C Max Amperage: 25A Housing/Wedge Body: Thermoplastic Seals: Silicone Elastomer Wire Range (AWG): 10-14AWG Contacts: Copper Alloy, Nickel-Plated (Gold or Tin Optional) Current Rating: Size 12 contacts rated at 25A continuous at 125°C. Current is fully rated without derating curve. IP Rating: IP68 (1M of water for 24 hours) Vibration: Continued continuity without degradation to mechanical or physical attributes following vibration. (max acceleration 20 g’s at Sine sweep of 10-2000Hz) Dielectric Value: Current leak less than 2 milliamps at 1500 VAC Corrosion Resistance: No evidence of corrosion after 48 hours of salt spray per MIL-STD1344, method 1001. Fluid Resistance: Connectors show no damage when exposed to most fluids used in industrial application.Insulation Resistance: 1000 megohms minimum 25°C Contact Retention: 70lbs. for Size 12 contacts Thermal Cycle: No cracking, chipping or leaking after 20 test cycles from -55°C to 125°C. Physical Shock: No unlocking, unmating or other unsatisfactory results during or after 50 G’s in each of three usually perpendicular planes. No electrical discontinuities longer than 1 microsecond. MIL-STD 202. Method 213, Condition “C”. Contact Milivolt Drop: Size 12 contacts with 12AWG conductor – 60mV (solid contact) drop max; 100mV (stamped & formed contact) drop max at 25A test current Vibration: Maintains continuity and exhibits no mechanical or physical damage after vibration levels of 20 G’s at 10-2000 Hz. Mating Cycles: No electrical or mechanical defects after 100 cycles of engagement and disengagement.
